How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback that has an unusual engine configuration. It's a bit noisy, but it's still enjoyable to drive.
The key fob battery on your Nissan Juke should be replaced every two years or every two years, or when it's low. It's easy to replace at home, but you'll require some tools.
Dead Coin Battery
If your Nissan Juke key fob isn't functioning, the first thing to check is the coin battery inside. It may be dead and must be replaced. This is a simple fix that only takes a few minutes. You can do this by flipping the fob over and removing the small latch/release at the back. Take out the old battery and then put in an alternative one, making sure that it's facing down in the fob. Line between the two halves of the fob carefully.
The fob will need to cleaned if it was exposed to water prior to being able to insert a new battery. This can be accomplished using paper towel and isopropyl alcohol or electronic cleaner, and allowing it to dry completely before re-inserting battery.
To start the car the key fob needs to also be connected to the car. This can be accomplished by following the instructions in the owner's manual or by using an OBDII scan. If the key fob is not been linked, it is the most likely reason of why it has stopped functioning. It is also possible that the fob is equipped with defective chip, however this is a rare occurrence. In this instance an entirely new receiver module might be needed. If this is the situation, it will have to be replaced by a skilled technician.
Water Damage
A key fob is battery operated, and these batteries need to be changed every two years or more, or at the first sign of your car not responding when you press the "start" button. Keys have rubber seals to keep water out, but submerging the key fob in the ocean or in a pool can damage the chip inside. If this happens, you'll need to get an alternate key from Nissan or a locksmith.
If the key's chip is an active chip it's likely that the computer has lost connection to it, which can be the result of a variety of reasons. It can be fixed by restarting the car. If the "Key ID error" message continues to appear then you should contact Nissan for assistance.
The three most common causes of this issue are dead key fob batteries or keys that are not programmed, and a damaged or faulty key fob that is damaged or defective. The first two issues are easy to fix, and the third one is more difficult to fix immediately, but it is generally fixable with some patience. WhoCanFixMyCar allows you to compare Nissan Key Replacement costs in your area and book your repair. You can read reviews of local Nissan dealerships, Nissan mechanics, and garages in just a few seconds.
Faulty Chip
The key fob on your Nissan Juke contains a special chip which sends a message to the vehicle when you turn it. The key may stop working because the chip is malfunctioning. If this happens you'll have to solve the issue by replacing the key. There are nissan duplicate car keys g28carkeys.co.uk might be damaged, including water damage, a dead coin battery or a damaged receiver module.
If your key fob stops working after a wash or even a bath, it is important to examine the chip for damage from water. Check that the metal clips holding the chip are securely. Also, ensure that the chip isn't in contact with water. If you observe any signs of water damage to the electronic component, remove the battery and wipe it down with isopropyl-ethanol or electronic cleaner.
If the chip is damaged If the chip is defective, you'll need to call your local locksmith or dealer. They will need the year as well as the model, make and year of your vehicle to locate an alternative. It is also necessary to write down your VIN (Vehicle ID Number) so that the dealer, or locksmith knows which key you have. This will allow them to find the correct key code, and also ensure that they cut the correct one.
Faulty Receiver Module
The key fob transmits a radio frequency signal to your car to perform a number of functions. It can open your trunk when you are rushing to get groceries or start your car by pressing the fob's button. It can also open your windows and turn on the horn in the event you lock your keys inside your car.
If the key fob stops working, it could be problems with the receiver module in the vehicle. The receiver modules are tuned so that they can pick up specific frequencies which correspond to the signals that are transmitted by Nissan key fobs. A defective receiver module could hinder your car's response to the signal generated by the key fob of Nissan.
Whatever the way your Nissan key fob gets damaged, it is always important to have a spare key in case the key is lost or broken. A spare key can be programmed by a locksmith or a dealership to work with your Nissan and help you avoid the stress of locking your keys in your car or losing them.
If your Nissan Juke key fob is exposed to clean rain or tap water, the problem could be solved by cleaning it with isopropyl ethanol or electronic cleaner. If the chip has fried, you'll need to purchase a new keyfob which can be coded for your car by a locksmith or dealer.